1、 充分了解发泡机的类型
1. Fully understand the type of foaming machine
发泡机的基本原理都是向发泡剂水溶液中引入气体，但不同类型的发泡机引入气体的方式不同。如低速搅拌型是靠慢速旋转叶片引入气体，气泡产量小，发泡效率低；高速叶轮型是靠高速旋转叶轮引气，泡径大小无法控制，泡沫不均匀；高压与中低压型产泡速度快、效率高气泡均匀、细小。
The basic principle of the foaming machine is to introduce gas into the foaming agent aqueous solution, but different types of foaming machines introduce different ways of introducing gas. Such as low speed stirring type by slow rotating blades by introducing gas bubbles, production of small, low foaming efficiency; high speed impeller type by high-speed rotating impeller air entraining, bubble size control, foam is not uniform; in high and low type bubble producing high efficiency and high speed, uniform and fine bubbles.
2、发泡机的基本参数
2. Basic parameters of foaming machine
a、产量：产量就是产泡量，必须略高于自己需泡量20%，以留有余地其产泡量应以下限为核定计算依据而不能以上限。
A, is the production of global output: output amount must be slightly higher than they need to leave room for the global 20%, global production capacity should be below the limit is calculated on the basis of approved but not to limit.
b、装机容量：装机容量就是装机总功率，此参数对核算电器电路对总用电量的适应性有重要意义。
B and installed capacity: the installed capacity is the total installed power. This parameter is important to calculate the adaptability of the electrical circuit to the total power consumption.
c、设备尺寸及泡径范围。
C, equipment size and bubble range.